Asphalt Calculator

Estimate the tons of asphalt for a driveway, car park or road repair from its length, width and thickness. Uses a typical compacted density of about 145 lb per cubic foot.

How to use the Asphalt calculator

Enter your values in the fields above. The results update as you type, so you can try different scenarios quickly. Press Reset to restore the example values. Nothing you type is stored or sent anywhere: all calculations happen in your browser.

Formula and method

Tons = length × width × depth × density (≈ 145 lb/ft³ ÷ 2,000)

Worked example

Using measurement system of Imperial (ft, in), length of 20 ft / m, width of 10 ft / m, depth of 3 in / cm, the asphalt calculator returns Cubic yards: 1.8519; Cubic metres: 1.4158; US short tons: 3.6255; Metric tonnes: 3.289. Change any value in the calculator above to see how the result responds.

Frequently asked questions

How thick should an asphalt driveway be?

Residential driveways are commonly 2–3 inches of compacted asphalt over a prepared base; heavier traffic needs more.

Why add extra?

Allow 5–10% extra for compaction, edges and waste. Confirm the density with your supplier.

Related tools

Material quantities and costs are estimates. Densities, waste and prices vary by supplier, so confirm amounts before ordering. Follow local building and electrical regulations.